(Tests Lasers from 0.1mW to 120mW output power in 0.1mW increments.)


The Laser Power Meter Sensor Module resting on a 9Volt battery



Large Area Silicone PIN Photo Diode Optical Sensor (3mm X 3mm)

The HLPM comes pre-assembled and Pre-Calibrated so you can use it as soon as it arrives.

The Laser Power Module was designed to let the hobbyist technician know
the output power of any Lasers from 400nm to 1100nm.

Simply attach a 9 volt battery and connect the output to a Digital Multi-Meter of your choice.
(Inexpensive Digital Multimeters can be purchased on eBay for less than $10.00)

Set the scale of the DMM to 200mv... shine the Laser beam onto the Silicone Optical sensor
and read the Laser Power output directly without the need to calculate a complicated mathematical formula.
An optical response correction charts is included for wavelengths other than 632.8nm.
You simply multiply 2 numbers together.

If your DMM shows a reading of 67.8 millivolts... your Laser beam output power is 67.8 milliwatts.
It's that simple.

This BRAND NEW Electronic item Measures aprox. 1.5" x 0.5" x 0.4" with 7.5" leads)

The Digital MultiMeter shows the Power output of the 650nm Laser (102.1mW) under test.
(after optical correction using the supplied chart the actual power output is 97mW)

$38.99 US ea.

(all + Shipping)

You may pay us securely with any major credit card through PayPal

Contact us

J.BAUER Electronics 1805 RTE 340 St. Telesphore, Quebec, J0P 1Y0, Canada Tel (450)269-2477