 
Tests most Lasers from 3mW to 3200mW output power Display resolution in 0.1mW increments to 999.9mW then in 1mW increments to 3200mW.
The New 3.2 Watt LaserBee II products come pre-assembled and Pre-Calibrated so you can use them as soon as they arrive whether you choose the Standard (OEM) PCB model or the fully enclosed Deluxe LaserBee II.
This 3.2 Watt (3200mW) Laser Power Meter was designed to let the hobbyist technician know the output power of almost any Laser from 3mW up to 3200mW. It does NOT require an optical correction factor chart. It does NOT use a photodiode sensor. The 3.2 Watt LaserBee II uses an included Thermopile Sensor Head that now has a connector and included removable quick connect Thermopile cable. The 3.2 Watt Laserbee II is calibrated using a Newport Model 1825-C Laser Power Meter and Thermopile Head. The 8x2 LCD module comes with a male connector and a female on the PCB so you can make an extension if needed. The LCD Backlight is controlled by the Push Buttons to turn it "ON" or "OFF" if you need to conserve battery power. The 3.2 Watt LaserBee II can test most Lasers from 3mW to 3200mW output power in 0.1mW increments to 1000mW then continues in 1mW increments to 3200mW.
Easy to operate... simply attach a single 9 volt battery... or external 9VDC power supply and shine your Laser's Beam onto the Thermopile Sensor and read almost any Wavelength Laser's power output directly on the Backlit LCD Display.
Comes with clear and easy to understand User Instructions and Drawings as well as the PC Interface Windows Data Logging Software on CD....
Can be re-calibrated by yourself follwing the User Instruction directions/recomendations. The new LaserBee II products now Feature lower and higher power detection range and resolution.. not to mention Data Logging and Peak Detection.
With the Data Logging Feature you can see real time Laser Power, Peak Power and Average Power right on the PC screen. You can Data Log the LaserBee II's output using the included Data Logging PC Interface Software. You can then Graph your data on screen and/or print it out to a Printer for a hard copy that you can include with your Tested Lasers.
The Deluxe LaserBee II model has the same specifications as the Standard LaserBee II (OEM) model except that the Deluxe LaserBee II is completely assembled, tested, calibrated and housed in a high quality sloped plastic enclosure. The Deluxe LaserBee II also comes standard with the Data Logging feature and Peak detection.
For PCs with Serial Ports a standard RS232 M-F extension cable is required but not supplied.
For USB Ports an RS232 Conveter Cable is supplied with the LaserBee II products, If you do not have a Serial Port available on your PC, the supplied USB to RS232 Converter Cable can be used to communicate with your LaserBee II products.
Specifications
Power Supply: ............................... 7-12 Volts DC (9Volt Battery or 9Volt DC Adapter recommended)
Sensor: .......................................... Thermopile (by J.BAUER Electronics)
Sensor Area: ................................. 8mm x 8mm (64 square mm)
Sensor Cable Length: ................... 18.0"
Thermopile Head Dimensions: ...... 1.65" x 1.50" x 1.00"
Power Range: ............................... 3mW to 3200mW
Display Resolultion: ...................... 0.1mW to 1000mW... 1mW increments to 3200mW
Power consumption: ..................... 4 milliamps @ 9vdc (without LCD Backlight)
Power consumption: ..................... 65 milliamps @ 9vdc (with LCD Backlight)
Total Dimensions: .......................... 2.55" x 1.90" x 0.95" (Including LCD)
PC Interface Software: .................. on CD
User Instructions: ........................... on CD
Click To Buy
$389.99
+ shipping |
|
|
|
|
|
|
